NEWS-Dongte Metal

How to Read a Mill Test Report (MTR) Before Approving Carbon Steel Orders

2025-12-03

A quick, practical guide to the key fields in an MTR—what to check, what red flags look like, and how Dongte Steel supports buyers with clear documentation.

Why Mill Test Certificates Matter and How Consumers Should Read Them

2025-11-25

This quick guide explains why Mill Test Certificates (MTCs) are essential for buyers and how to read them with confidence—plus why Dongte Steel is a trusted supplier you can rely on.

Common Mistakes Buyers Make When Purchasing Carbon Steel — and How to Avoid Them

2025-11-18

A practical, buyer-focused guide showing five frequent procurement mistakes—wrong grade, missing certifications, ignoring surface condition, underestimating fabrication needs, and poor logistics planning—and simple steps to avoid them, with Dongte Steel as your sourcing partner.

What is the material of carbon steel plate and what are its advantages and disadvantages

2024-01-28

It is a type of steel with a carbon content lower than 2.11% and without intentionally adding metallic elements, and can also be called plain carbon steel or carbon steel. In addition to carbon, it also contains a small amount of elements such as silicon, manganese, sulfur, and phosphorus inside. The higher the carbon content, the better the hardness and strength, but the lower the plasticity.

What is the difference between carbon steel and stainless steel

2023-11-16

The density of carbon steel is slightly higher than that of ferritic and martensitic stainless steel, but it is lower for austenitic stainless steel, so the difference between carbon steel and stainless steel is different.

Application fields of stainless steel plate

2023-04-18

Stainless steel plate is a kind of steel with an oxide film, which can resist the corrosion of most atmospheres, water and acid-base media. Therefore, stainless steel plates are widely used in many fields. The following are several main application directions of stainless steel plates.

Classification of carbon steel

2023-03-14

Low carbon steel (C: ≤0.25%) Also known as mild steel, low carbon steel is easy to accept various processing such as forging, welding and cutting, and is often used to make chains, rivets, bolts, shafts, etc.

The difference between galvanized sheet and galvanized sheet

2023-03-24

Material composition: Galvanized sheet is to coat the surface of iron substrate with a layer of zinc, while galvanized sheet is to coat the surface of iron substrate with a layer of aluminum-zinc alloy. Therefore, the main component of galvanized sheet is zinc, and the main component of galvalume is aluminum and zinc.

What is stainless steel plate? What are the characteristics of stainless steel plate?

2022-09-16

Stainless steel plate is a common building material. Before buying stainless steel plates, you must first understand the characteristics of stainless steel plates. What is the correct stainless steel plate? What are the characteristics of stainless steel plate?

What fields can stainless steel coils be used in?

2022-09-16

The application of stainless steel in the automotive industry should be regarded as a relatively developed application field of stainless steel plate. Using high-strength stainless steel plate as the raw material for the car body structure can greatly reduce the weight of the vehicle and enhance the strength of the overall structure of the vehicle. If the vehicle panel is made of stainless steel plate, it can effectively save maintenance costs. In addition, stainless steel sheets are used in the production of automotive exhaust systems due to their good resistance to chloride ion corrosion and heat resistance. European and American countries are using a large number of stainless steel plates as raw materials for automobile production.

What are the commonly used carbon steel?

2023-03-06

The carbon content of 1095 high carbon steel is 0.95%~1.03%. After heat treatment, the hardness can be processed to a high hardness of 57-60HRC, and the toughness is also good.

Is the flattening and slitting process of stainless steel coils important?

2022-09-16

Most of the stainless steel coils leave the factory in whole coils, mainly for the convenience of transportation. In the hands of our Zhongxing Yide Stainless Steel Processing Factory, in order to facilitate processing and manufacturing, the stainless steel coils will be flattened by professional stainless steel unwinding equipment. , this process is called Kaiping.

Production process of galvanized sheet

2022-09-16

Galvanized sheet is a metal material that coats the surface of ordinary carbon steel with a layer of zinc. Its main function is to prevent the steel from being oxidized and corroded during use and prolong the service life. The following is the production process of galvanized sheet.

< 1 > proceed page

CONTACT

Email:

sales01@zgdtsteel.com

WhatsApp:

+86 15314127755

WeChat

We use optional cookies to improve your experience on our website, including through social media connections and to serve personalized advertising based on your online activity. If you reject optional cookies, we will only use cookies that are necessary to provide you with the service.